You are here: Home » News » What are the functions of the holes on the injection mold

What are the functions of the holes on the injection mold

Views: 5     Author: Site Editor     Publish Time: 2023-09-04      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
What are the functions of the holes on the injection mold

Molds are one of the foundations of modern industry, and injection molds are an important branch of molds, a process used to produce plastic components. Plastic products such as automotive parts, medical devices, and consumer electronics can be mass-produced on a large scale through molding.Anyone with some knowledge of injection molds will know that there are plenty of holes around the mold. What are the functions of each hole?

1. The sprue bushing. There are installed on the top of the mold and are used to feed the materials.

2. Water holes. Used for the cooling water transfer and to control the oil temperature.

3. Ejector holes. For the installation of the ejector pins in the demolding system.

4. Guide pin hole. Used to locate the mold base with guide pins.

5. Screw holes.For fixing the mold plate and other accessories, such as slides and lifts.

6. Lifting hole. For the installation of the mold.


PRODUCT CATEGORY

CONTACT US

Add :floor1huanjin industry park,lefushan,fenggang, dongguan 523708,china
Phone :+86-769-88654499 88654498
fax:0769-88654498
E-mail:
AE Mould products Co.,Ltd

QUICK LINKS

PRODUCTS CATEGORY

CONTACT US

    Add : floor1huanjin industry park,lefushan,fenggang, dongguan 523708,china
    Phone : +86-769-88654499 88654498
    fax:0769-88654498
    E-mail : info@aemouldproducts.com

Copyright  2023  AE Mould products Co.,Ltd. 
Registered Brand AE,AEMEELE,RELUN,YEVE